Skripsi
RANCANG BANGUN PROTOTIPE PELACAK SINAR MATAHARI UNTUK PENGOPTIMALAN PENYERAPAN SOLAR CELL BERBASIS ARDUINO UNO
RINGKASAN
Solar cell merupakan alat yang dapat mengkonversi sinar matahari menjadi energi listrik secara langsung dengan menggunakan teknologi photovoltaic. Salah satu faktor yang mempengaruhi optimalnya penyerapan dari solar cell adalah pemasangan permukaan solar cell. Pemasangan permukaan solar cell yang tegak lurus terhadap sinar matahari secara langsung akan memaksimalkan energi yang dihasilkan. Tetapi dalam kenyataannya, pemasangan solar cell kabanyakan masih statis atau permanen dengan sudut elevasi yang tetap sehingga solar cell tidak bisa mendapatkan intensitas sinar matahari secara maksimal karena matahari selalu bergerak dari timur ke barat.
Berdasarkan permasalahan yang ada sehingga mendorong penulis untuk membuat prototipe pelacak sinar matahari untuk pengoptimalan penyerapan solar cell. Penelitian ini menggunakan metode penelitian eksperimen dengan metode pengumpulan data, observasi, studi pustaka dan pengembangan sistem dari perencanaan, analisa kebutuhan, perancangan, pengujian, dan analisa hasil.
Sistem ini akan bekerja dengan cara mengarahkan permukaan solar cell agar tegak lurus terhadap arah sinar matahari untuk mendapatkan energi matahari yang maksimal dengan menggunakan Arduino uno sebagai kontrol utama yang mendapat nilai masukan dari sensor LDR yang kemudian diproses dan Arduino uno akan memerintahkan motor servo untuk menggerakan solar cell kearah datang sinar matahari. Monitoring sistem kerja prototipe ini menggunakan LCD 16x2 dan ditambahkan juga fitur IoT (Intenet of Things) untuk monitoring sistem kerja prototipe dari jarak jauh melalui smartphone.
Kata Kunci: Arduino Uno, Solar Cell, LDR, IoT
ABSTRACT
Solar cell is a device that can convert sunlight into electrical energy directly by using photovoltaic technology. One of the factors that influence the optimal absorption of solar cells is the installation of solar cell surfaces. Installation of solar cell surfaces that are perpendicular to direct sunlight will maximize the energy produced. But in reality, most solar cell installations are still permanent with a fixed elevation angle so that the solar cell cannot get maximum sunlight intensity because the sun is always moving from east to west.
Based on the existing problems that encourage authors to make prototypes of sunlight tracking to optimize the absorption of solar cells. This study uses experimental research methods with methods of data collection, observation, literature study and system development from planning, needs analysis, design, testing, and analysis of results.
This system will work by directing the surface of the solar cell so that it is perpendicular to the direction of sunlight to get maximum solar energy by using Arduino uno as the main control which gets input values from the LDR sensor which is then processed and Arduino uno will instruct the servo motor to move solar cell towards the coming sunlight. The prototype work monitoring system uses a 16x2 LCD and the IoT (Intenet of Things) feature is added for remote monitoring of the prototype work system via a smartphone.
Keywords: Arduino Uno, Solar Cell, LDR, IoT
IF2241 | IF 2241 PAN R | UPT. PERPUSTAKAAN PUSAT | Tersedia - No Loan |
Tidak tersedia versi lain